A hot water shower is just what we need on a chilly winter morning. It may be time to get a tankless water heater. Electric tankless water heaters are modern devices that give you hot water when needed, so you never run out. Installing an electric tankless water heater is a tricky task. However, hiring professionals will make the job easy and quick. Keep reading to learn how to install an electric tankless water heater yourself!
Tankless water heaters use less energy and lower electricity bills than standard water heaters with tanks. They are also small, so they can be put in places that aren’t very big. Tankless water heaters are great for homes because they save space and don’t need to be set up by a professional.
Installing Your Electric Tankless Water Heater Safely
Getting an instant water heater is a great way to save room and energy and have hot water all the time. Water heaters that store hot water differ from electric portable water heaters because they only heat water when needed. This makes the water heaters work very well. But putting one in place requires some careful steps.
Always turn off the power at the circuit switch to avoid getting electrocuted. Use the right tools to wear safety gear, like gloves and safety glasses. Make sure your home’s electricity system is compatible with the new heater. You may need to connect the new heater to a better system if it can’t. Ask a professional plumber company for help if you think a step needs to be revised.
Turn Off the Power & Water Supply
Before installing your tankless water heater, you must ensure you’re safe and avoid any plumbing problems. First, turn off the power from the circuit switch to your current water heater. It’s important to do this to avoid getting an electric shock. Next, turn off the water so that there are no leaks or spills while you take out the old unit.
Demand water heaters use a heat exchanger to heat water on the spot, which saves more energy than standard water heaters that store hot water. Following these steps, you can safely switch to a water heating system that uses less energy and takes up less room.
Remove the Old Water Heater
You’ll need to remove the old oil-filled water heater to make room for the new, more energy-efficient one. Connect a hose to the exit opening and let the cold water flow. This will empty the tank fully, which is important to prevent spills. Next, carefully remove the pipe and electrical links. Remember that the old water heater can be heavy, so you may need help moving it.
Standby heat losses make traditional water heaters less efficient because they use more energy and cost more to run. A tankless water heater will help reduce these losses and make your home more efficient.
Choose a Mounting Location
It is very important to pick the right spot for your new electric tankless water heater so that it will work well. Ensure the place you choose is clear enough according to the manufacturer’s instructions and the building rules in your area.
Place the heater on a wall or other stable surface close to where you need hot water the most. This is a quick and easy way to get the hot water you need. Tankless water heaters heat cold water only when needed, increasing the flow rate and saving energy. Putting your tankless water heater in the right place will heat water throughout your home quickly and efficiently.
Install Electrical Wiring
Installing the electrical wiring for your new electric tankless water heater is important to ensure it works safely and competently. This heater needs an electrical line, which usually requires more power than other types. Connect the wires from your electrical panel to where the system will go. Keep in mind that you need experience with electric wiring to make any electrical changes. It is best to have a professional electrician do this job because it can be hard and expensive.
Electric portable water heaters don’t need to be vented like combustion heaters, making them perfect for houses. If you wire your heater correctly, it should be able to handle long showers and lots of hot water use without any problems.
Mount the Unit Properly
You must mount your electric tankless water heater right so that it works well. First, use the hooks and tools that came with the unit to firmly connect it to the wall. Ensure the heater is level to avoid any problems with its work. This step is very important because it shows how well the heater can heat water for showers, dishwashing, and other uses around the house.
Not only will it save you money on energy costs, but it will also last longer if you put it correctly. This easy step-by-step guide will ensure your tankless water heater works perfectly and reliably in your home.
Connect the Water Supply Lines
Connecting the water supply to your tankless water heater is important to ensure it works right. First, use the right fittings to connect the pipes that bring in cold water and lines that let hot water out to the heater. For better system upkeep, it’s best to put shut-off valves on both the input and the exit.
For lines that last a long time and work well, it’s best to use long-lasting materials like copper or stainless steel. This step ensures that your portable water heater can provide enough hot water while requiring as little upkeep as possible. As long as you follow these steps, you should be able to get hot water for your whole family without any problems.
Install a Pressure Relief Valve
For some portable water heaters, installing a pressure release valve is a must to keep the pressure from building up too much. This valve helps keep the system safe from damage and ensures it works smoothly. Pay close attention to the manufacturer’s directions for the right way to install and place it. Also, check to see if the pressure release valve meets your area’s plumbing rules to ensure it is safe and legal.
Traditional tank water heaters store hot water and lose heat when not used. Tankless water heaters, like electric tankless water heaters, heat water only when needed, which uses less energy. Installing a pressure release valve correctly will make your tankless water heater installation more reliable and last longer. It will also make sure that it works safely and efficiently in your home.
Flush the System
Before you turn on your tankless water heater, you must flush the system to ensure it works well and lasts a long time. First, turn on the water source to flow through the unit. This step helps eliminate any dirt or air bubbles that may have formed during fitting. While cleaning, carefully check the links for leaks and fix them to keep water from going to waste and ensure the system works well.
Traditional water heaters store hot water, but portable water heaters heat water only when needed. This way, you can always have hot water when you need it. Properly cleaning your system will help keep it working well and reliably over time, ensuring you always have hot water in your home when needed.
Test The Unit
After installing your tankless water heater:
- Test it to make sure it fits your hot water demands.
- Turn on the circuit breaker to power the device.
- Open a hot water faucet and watch the heater immediately heat water.
- Check the temperature and flow rate to make sure they meet your expectations and modify for best performance.
Traditional water heaters lose standby heat, whereas tankless water heaters work on demand, saving energy and money. During testing, check the complete installation for leaks and loose connections. Ensure all electrical wiring is secure and the item works as intended. These inspections and checks guarantee your tankless water heater works reliably and meets local construction and safety requirements, delivering continuous hot water when you need it.
Conclusion
Tankless water heaters, whether electric or gas, are major upgrades for any house. These devices heat water on demand, saving energy over tank heaters. Homes may save money, improve energy efficiency, and get hot water when they need it with a tankless type. Tankless water heater installation must comply with electrical and plumbing rules for maximum efficiency and endurance. From installing the unit to checking its performance, attention to detail is essential for an effective hot water supply. Modern families wishing to save energy and improve comfort should invest in an electric or gas tankless water heater for its energy efficiency, decreased standby heat losses, and greater flow rates.
Contact Tommie’s Plumbing For Water Heater Installation
Tommie’s Plumbing can fix any water problem in your home and keep things going smoothly. Our team is ready to help with anything, from a blocked drain to a plumbing issue. We also offer services of Copper Line Repair, Water Heater Installation, Sewer & Drain Cleaning, High Water Bills, Fix High Water Pressure, and more. Contact us today to make an appointment, and we’ll take care of your plumbing needs quickly and correctly.
